LED Driver (Constant Current) White 10W 350mA

The DC350mA 10W will run up to eight one watt high power 350mA LED's. The maximum distance from the LED's to the driver is approximately 35 metres.

The 350mA LEDs must be wired in series when using this driver.

This driver is not dimmable. It can only be switched.

Features:

• Double output impedance for use in household electrical appliances.
• IP20 independent driver, for indoor use.
• Class II protection against electric shock for direct or indirect contact.
• Supplied with terminal cover and cable retainer.
• Input and output terminal blocks on the same side (wire cross-section up to 0,5 - 2,5 mm2 / AWG20 - AWG13).
• Single terminal block on primary and secondary circuits.
• Clamping screws on primary and secondary circuits for cables with diameter: min. 3 mm - max. 6 mm.
• Current regulation -5 % +5 % including temperature variations.
• Minimum cut-out hole diameter: 40mm.
• Suitable for cooker hoods.
• Protections:
  - against overheating
  
  - against short circuits
  
  - against mains voltage spikes
  
  - against overloads