Ceiling Flush Mounted Microwave Presence Detection Switch White 400W

The Ceiling flush mounted microwave presence detection switch is designed for the automatic switching of lighting, heating, and air conditioning loads. These neat and unobtrusive models are ideal for flush mounting through suspended or plasterboard ceilings. The sensor detects movement within its range of detection by emitting low-power microwave signals and measuring the reflections as the signal reflects off moving objects such as people moving through a room.

When movement is detected, the load switches on. If no more movement is detected within a certain time, the MWCEFL will switch the load off. This time lag (hold time) can also be set via the rotary switch. Upon detecting movement, if the ambient light is dark enough, MWCEFL will turn the load on. The ambient threshold can also be set by setting the rotary dial to the appropriate preset. If no more movement is detected within a pre-selected time, then MWCEFL will turn the load off.

Key Features

Operating voltage: 220-240V 50Hz

Loading: Switches up to 400W of most types of load including LED Switches up to 1200W of resistive load

Detection area: 50 / 75 / 100%

Time lag range: 5sec, 30sec, 1min, 5min, 10min, 30min

Photocell range: 2 lux - 50 lux (at the photocell) and inactive

Sensor type: Microwave motion detection

Detection range: 12m x 6m maximum

Detection angle: 30 - 150 degrees

Mounting height: Up to 6m maximum

IP rating: IP20

Operating temperature: tamb -20ºC....+60ºC

Dimensions: 85 x 85 x 65mm