
Et Lumiere
Battlestar Uplight 45° 350mA 3W Aluminium 3000K Warm White
Code: D4000 FROST IP65
£55.00
Out of stock
The Battlestar Uplight 45° 350mA is a recessed uplight that can be used in floors and walls. The Battlestar Uplight is rated IP65, this allows it to be fitted into wet areas, for example outside in decking. Constructed and finished in aluminium with frosted glass.
Please note; this product requires a 350mA driver and must be wired in series.
LED Driver Options
- LED Driver (Switching) - Use this driver for on/off control. Cannot be used for dimming.
- LED Driver (Dimming) - For use with nearly all domestic dimming lighting. Most resistive dimmers have a minimum load of 60W, therefore ensure that if this not met, a dummy load is added to the circuit, such as a mains voltage halogen fitting.
- LED Driver (1-10V) - For use with 1-10V dimmer modules or 1-10V control systems. This type of dimming does not have a minimum load.
- Wise Scene/Dimming (Dimming + Wireless) - This controller can be used for both switching and dimming. Additionally, this unit can communicate via radio and external push buttons, allowing you to wirelessly control your fitting. Note that an additional 24V LED driver is required to power the Wise Scene/Dimming Receiver.
Basket & checkout arrive in a later phase.
- Dimmable
- Yes
- Drive-Over Limits
- 2000kg 25km/hr
- LED Type
- CREE M3
- Cable Length
- 1m
- Cut Out
- 75mm (Diameter)
- Depth
- 125mm
- Diameter
- 88mm
- Amperage
- 350mA
- Maximum Wattage
- 3W
- Requires Driver
- Yes
- Colour
- Aluminium
- Construction
- Aluminium / Glass
- IP Rating
- IP65
- Beam Angle
- 45°
- Colour Temperature
- 3000K Warm White
- Lumens
- 240 lm
- Lumens Per Watt
- 80 lm/W